Leica mojo 3D User Manual page 324

Leica mojo3D, mojo3D Enhancements

4. Connect the blue GPS antenna cable to the
blue connector on the rear of the mojo3D
display.
5. Connect the purple cell modem antenna
cable to the purple connector on the rear of
the mojo3D display.
• The cables must not be cut, kinked or bent tightly, as their performance will be
degraded and system failure may result.
• Cables should be routed neatly back to the mojo3D.
• The antenna must be mounted horizontally and not on an angle to ensure best
signal reception possible.
4 5
GeoPRO_004
324