Leica mojo 3D User Manual page 212

Leica mojo3D, Correction Sources
Configuring
TM
GL1DE as the
only correction
source, step-by-
step
TM
To configure GL1DE
1. At the main navigation screen, tap the settings button.
2. On the flyout menu tap the correction source button.
The Correction Source screen appears.
3. In the Correction Source list, tap on
TM
the GL1DE Only button to select
it.
4. Tap the button and you are returned to the main navigation screen.
When the mojo3D is using GL1DE
the Status button of the main navigation screen.
as the only correction source, carry out the following steps:
TM
, the GL1DE
TM
icon similar to
212
displays on