Setting The Display Language; Measuring Channels And Parameters - SMA SUNNY BOY 5000-US Installation Manual

SMA America, LLC
8.4 Setting the Display Language
The LCD can display information in 1 of 4 different languages. The language is configured via 2 slide
switches that are located on the lower edge of the LCD.
1. Open the Sunny Boy as described in Section 6.3 "Opening the Sunny Boy" (page 39).
2. Set the switches to the required language, as shown below.
Language
German
English
French
Spanish
3. Close the Sunny Boy as described in Section
6.8 "Closing the Sunny Boy" (page 56).
☑ The display language is set.

8.5 Measuring Channels and Parameters

The communication options support a number of measuring channels and messages from the Sunny
Boy inverters. The following abbreviations are used:
OCU Operation Control Unit
SRR Current Control System (German abbreviation for
"Stromregelungsrechner")
The OCU and SRR are redundant processor control systems for the utility protection functions.
SB50US-80US-IA-en-36
Switch S2 Switch S1
B
B
A
A
B
A
B
A
Displays and Messages
SB50US-80US-IA-en-36 71