Communication - SMA SUNNY BOY 5000-US Installation Manual

SMA America, LLC
Positive Grounding
1. Connect the negative DC cable to the terminal (A)
labeled COMBINED in the DC disconnect.
2. Connect the positive DC cable to the terminal (B)
labeled PV GROUNDED in the DC disconnect.
3. Tighten all cables in the terminal blocks in the DC disconnect with a torque of 15 in‑lb. (1.7 Nm).

6.7 Communication

The Sunny Boy can be equipped with a communication interface in order to communicate with SMA
communication products.
You will find further information and a list of applicable communication products at
www.SMA‑America.com.
SB50US-80US-IA-en-36
Electrical Connection
SB50US-80US-IA-en-36 55