Connecting The Ac Cables In The Sunny Boy - SMA SUNNY BOY 5000-US Installation Manual

Electrical Connection

6.5.3 Connecting the AC Cables in the Sunny Boy

1. Using a screwdriver, make a hole in the rubber
grommet in the inverter.
2. Remove the rubber membrane.
3. Feed the cable through the rubber grommet into the
inverter.
4. Pull the cable back slightly so as to seal the rubber
grommet.
5. Connect the green-yellow cable of the SMA DC
disconnect to the terminal labeled
44 SB50US-80US-IA-en-36
.
SMA America, LLC
2 3 5 7 A B + -
2 3 5 7 A B + -
2 3 5 7 A B + -
2 3 5 7 A B + -
Installation Manual