Setting The Display Language; Communication - SMA SUNNY BOY 1100 Installation Manual

Electrical Connection
5.3 Setting the Display Language
You can set the language of the display using the switches on the underside of the display assemblies
inside the Sunny Boy.
Proceed as follows to do so:
1. Open the Sunny Boy as described in section 7.1 "Opening the Sunny Boy" (page 32).
2. Set the switches to the desired language as illustrated below.
Language Switch S2
German B
English B
French A
Spanish A
3. Close the Sunny Boy as described in section 7.2 "Closing the Sunny Boy" (page 33).
5.4 Communication
The Sunny Boy can be equipped with a communication interface (slot see section 5.1.2 "Interior
View" (page 16)) in order to communicate with special data acquisition devices (e. g. Sunny
WebBox) or a PC with appropriate software (e.g. Sunny Data Control).
See the communication interface manual for a detailed wiring diagram and a description of the
mounting.
22 SB11_12_17-IEN094131
Switch S1
B
A
B
A
SMA Solar Technology AG
Installation Guide