Unpacking and Inspection
3 Unpacking and Inspection
Check the delivery for completeness and any visible external damage. Contact your SMA specialty
retailer or SMA if the delivery is incomplete or you find any damage.
If it is necessary to send the Sunny Boy back, use the original packaging.
Contact information is provided in the "Contact" section, page 103.
3.1 Scope of Delivery
Position Quantity Description
A
1
B
1
C
1
2
D
2
E
2
F
3
G
1
H
1
I
1
2
* only SB 5000US-12/SB 6000US-12/SB 7000US-12/SB 8000US-12
16
SB50US-80US-IA-en-36
Sunny Boy
Wall mounting bracket
Replacement screw and replacement conical spring washers for connecting
the enclosure lid to the Sunny Boy.
Screws and washers for fastening the Sunny Boy to the wall mounting bracket
Spare jumpers for fan test
Handle covers (left and right)
DC varistors*
Insertion tool for DC varistors*
DC Disconnect
Screw and washer for closing the DC Disconnect lid
Screws and washers for fastening the DC Disconnect to the wall-mounting
bracket
SMA America, LLC
Installation Manual