Ipv4 Configuration Using Setip (Mac) - Dell B1165nfw User Manual

Wired network setup
Click the icon (third from left) in the SetIP window to open the TCP/
6
IP configuration window.
7 Enter the machine's new information into the configuration window as
follows. In a corporate intranet, you may need to have this information
assigned by a network manager before proceeding.
Find the machine's MAC address from the Network Configuration Report
(see "Printing a network configuration report" on page 138) and enter it
without the colons. For example, 00:15:99:29:51:A8 becomes
0015992951A8.
Click Apply, and then click OK. The machine will automatically print the
8
Network Configuration Report. Confirm that all the settings are
correct.

IPv4 configuration using SetIP (Mac)

Before using the SetIP program, disable the computer firewall from System
Preferences > Security > Firewall.
The following instructions may vary from your model.
1 Connect your machine to the network with a network cable.
2 Insert the supplied software CD into your CD/DVD drive.
3 Double-click the CD/DVD icon that appears on your Mac desktop.
• For Mac OS X 10.8, Double-click the CD/DVD icon that appears on
your Finder.
Double-click the MAC_Installer folder > Installer OS X icon.
4
Click Continue.
5
Read the license agreement and click Continue.
6
Click Agree to agree to the license agreement.
7
8 Click Install. All components necessary for machine operations will be
installed.
If you click Customize, you can choose individual components to install.
2. Using a Network-Connected Machine
139