Dell B1165nfw User Manual page 163

Wireless network setup
When the wireless network setting is completed, disconnect the USB
10
cable between the computer and machine. Click Next.
11 The Wireless Network Setting Complete window appears.
Select Yes if you accept the current settings and continue the setup
procedure.
Select No if you want to return to the beginning screen.
Then, click Next.
12 Click Next when the Confirm Printer Connection window appears.
Select the components to be installed. Click Next.
13
After selecting the components, you can also change the machine name,
14
set the machine to be shared on the network, set the machine as the
default machine, and change the port name of each machine. Click Next.
After the installation is finished, a window asking you to print a test page
15
appears. If you want to print a test page, click Print a test page.
Otherwise, just click Next and go to step 16.
16 If the test page prints out correctly, click Yes.
If not, click No to reprint it.
17 Click Finish.
Ad hoc via USB cable in Windows
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an ad-hoc wireless network by
following the simple steps below.
• Items to prepare
- Network-connected computer
- Software CD that was provided with your machine
- The machine installed with a wireless network interface
- USB cable
Check whether the USB cable is connected to the machine.
1
Turn on your computer and the wireless network machine.
2
3 Insert the supplied software CD into your CD/DVD drive.
The software CD should automatically run and an installation window
will appear.
If the installation window does not appear, click Start > All programs >
Accessories > Run.
X:\Setup.exe replacing "X" with the letter, which represents your CD/
DVD drive and click OK.
2. Using a Network-Connected Machine
163