Dell B1165nfw User Manual page 176

Dell mono multifunction printer user's guide
Hide thumbs Also See for B1165nfw:
Table of Contents

Advertisement

Wireless network setup
When using the ad hoc mode, in operating systems such as Windows Vista,
you might need to set the wireless connection setting every time you use
the wireless machine.
You cannot use infrastructure mode and ad hoc mode at the same time for
Dell wireless network machines.
The machine is within the range of the wireless network.
The machine is located away from obstacles that could block the wireless
signal.
Remove any large metal objects between the access point (or wireless
router) and the machine.
Make sure the machine and wireless access point (or wireless router) are not
separated by poles, walls, or support columns containing metal or concrete.
The machine is located away from other electronic devices that may
interfere with the wireless signal.
Many devices can interfere with the wireless signal, including a microwave
oven and some Bluetooth devices.
Whenever the configuration of your access point (or wireless router)
changes, you must do the product's wireless network setup again.
If Wi-Fi Direct is ON, this machine only supports IEEE 802.11 b/g.
If the access point is set to work with the 802.11n standard only, it may
notconnect to your machine.
2. Using a Network-Connected Machine
176

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents