Figure 17 ─ New Group Setup Screen; Figure 18 ─ New User Setup Screen - PACOM 4-channel digital video recorder User Manual

To add a Group, highlight the + Group... box and press the
you to enter the Group name.
The authority levels that can be turned On and Off are:
Shutdown ─ The user can shut the system down on a local system.
Upgrade ─ The user can upgrade the software on a local system or a PC running RAS.
System Time Change ─ The user can change the system date and time on a local system or a PC running RAS.
Data Clear ─ The user can clear all video data or format disks on a local system or a PC running RAS.
Setup ─ The user without Setup authority cannot establish any system settings excluding system shutdown
and logout on a local system or a PC running RAS.
Color Control ─ The user can control brightness, contrast, hue and saturation for cameras on a local system
or a PC running RAS.
PTZ Control ─ The user can control the PTZ camera on a local system or a PC running RAS.
Alarm-Out Control ─ The user can reset the DVR's outputs including the internal buzzer during an alarm by
pressing the
ALARM
Covert Camera View ─ The user can view video from cameras set as Covert while in the Live Monitoring
or Search mode on a local system or a PC running RAS.
System Check ─ The user can view the remote system status or check the remote system status as a batch
process on a PC running RAS.
Record Setup ─ The user can establish all Record settings on a local system or a PC running RAS.
Search ─ The user can access the Search mode on a local system or a PC running RAS.
Clip-Copy ─ The user can copy video clips on a local system or a PC running RAS, and save video data in
an AVI, bitmap or JPEG file format.
To add a User, highlight the + User... box and press the
you to enter the User Name.
NOTE: In addition to using the front panel buttons, you can use the virtual keyboard to assign the
password. To display the virtual keyboard click the
You can use up to 15 characters including spaces in the group name.
Enter the name and assign authority levels to the group. Highlighting
the Authority box and pressing the
authority levels being turned On and Off. Highlighting the individual
authority level boxes and pressing the
that authority level being turned On and Off.
Figure 17 ─ New Group setup screen.
button on the front panel on a local system or alarm-out control button on a PC running RAS.
Enter the name and assign the User to a Group and password. You can
use camera buttons 1 to 4 on either the front panel to assign the password.
The password can be up to 8 digits. You will be asked to confirm the
password.
Figure 18 ─ New User setup screen.
4-Channel Digital Video Recorder
button. A virtual keyboard appears allowing
button will toggle between all
button. A virtual keyboard appears allowing
...
button using the mouse (not supplied).
button will toggle between
17