Table of Contents
Advertisement
User's Manual
Audio
Highlight Audio in the Devices menu and press the
Figure 34 — Audio setup screen.
Alarm-Out
Highlight Alarm-Out in the Devices menu and press the
settings and establish a schedule for alarm output from the DVR.
Figure 35 — Alarm-Out Settings screen.
Highlighting the Schedule tab causes the Schedule screen to display.
Figure 36 — Alarm-Out Schedule screen.
36
button. The Audio setup screen appears.
The DVR can record up to four audio inputs. Highlight the
box beside the input and press the
appears, and you can select which camera you want associated
with that audio input.
Highlight Enable Audio-Out and press the
toggles between enabling and disabling audio out.
button. The Alarm-Out screen allows you to change the
The alarm output can be given its own title by highlighting
the box under the Title heading and pressing the
A virtual keyboard appears allowing you to enter the title.
Highlighting the box under the Type heading allows to set
the alarm output for NO or NC (normally open or normally
closed).
Highlighting the box beside Dwell Time and pressing the
button allows you to set the dwell time of the alarm output.
Dwell times range from 5 seconds to 30 minutes.
You can add and edit alarm output schedules on this screen.
Highlight the + and press the
Highlighting the boxes under the Column heading and
pressing the
button allows you to edit the information in
those boxes.
The Day box allows you to select the days that the alarm
schedule will be active. The choices are: Sun, Mon, Tue,
Wed, Thu, Fri, Sat, M~F, Hol and All.
The Range box allows you to set the time that the alarm
schedule will be active in 15-minute increments from 00:00
to 24:00.
button. A list of cameras
button. This
button.
button to add a schedule.
Advertisement
Table of Contents
