Selecting Chime - Menvier Security TS2500 Operator's Manual

User Menu 1

Selecting Chime

This option allows you to enable or
disable the chime feature for your wards.
If a ward has the chime feature enabled,
detection circuits that have been
programmed as "Chime" will generate a
chime tone when activated.
1. At the remote keypad enter your
passcode followed by [.
2. Press 5 followed by [ to select the
chime option.
3. The display will show which wards are
currently selected for chime.
4. To select or deselect wards A - H press
1 - 8. To select or de-select wards I -
P press A then 1 - 8.
5. Once you have the required wards
selected press [ to accept.
6. Press ] twice to return the system to its
original state.
27