Operation
Setting Your Ward(s)
If your user code is assigned to more than
one ward, you may be able to select the
wards that you want to set after selecting
the SET WARDS option.
1. At the remote keypad enter your
passcode.
2. Press 0 to set your ward(s) or 8 to set
your wards silently.
3. Select wards by pressing 1 - 8,
pressing A or C will toggle the display
between wards A - H & wards I - P.
4. When the required wards are displayed
press [ to set them.
5. Leave the area to be protected by the
designated exit route. The internal
sounder will sound.
6. Close the final door and press the exit
terminator button (if fitted).
7. When the internal sounder stops the
ward(s) is set.
If the exit tone changes to an alarm
tone, you must re-enter the protected
area and enter your passcode. The
display will show the ward(s) which failed
to set.
11