Prefix/Suffix Code - CipherLab 1660 User Manual

1660 Barcode Scanner

5.3 PREFIX/SUFFIX CODE

By default, there is no prefix code, and [ENTER] or [CR] (Carriage Return) is configured
to be suffix code. Up to 8 characters can be configured, for example, "Barcode_", and
you will have the string
"Barcode_1234567890".
If "BT HID" or "USB HID" is configured for interface,
then become applicable. You may decide whether or not to apply Key Status when
"Normal Key" is selected for Key Type.
Key Type
Scan Code Up to
allowed.
Normal Key Up
allowed.
1) Read the barcode above to apply prefix code or suffix code separately, and follow
steps 2~3. (Max. 8 characters each)
2) Read the "Hexadecimal
For example, read "2" and "B" for the scanner to prefix or suffix the character [+].
3) Read the "Validate" barcode to complete this setting.
154
User Guide
appear
4 scan code values
to 8 character strings
Value" barcode on page 218 for the desired character string.
in front of the
Key Status
are N/A
are Add Shift
Add Left Ctrl
Add Left Alt
Add Right Ctrl
Add Right Alt
Refer to Keyboard Wedge
Configure Prefix
Configure Suffix
barcode read, like
Key Type and Key Status
Table.
Enter Setup
this –
will