Inter-Function Delay; Hid Character Transmit Mode - CipherLab 1660 User Manual

2.4.3 INTER-FUNCTION DELAY

By default, the inter-function delay is set to zero. Specify a value, ranging from 0 to 254,
to match the computer response time of the keyboard interface. Such delay time is
inserted between every function code (0x01 ~ 0x1F) being transmitted. The longer the
delay time is, the slower the transmission speed will be.
Value Delay Time
0 Disable
1 ~ 14 10 millisecond
15 ~ 24 20 millisecond
25 ~ 34 30 millisecond
35 ~ 44 40 millisecond
45 ~ 54 50 millisecond
... ...
1) Read the barcode above to specify the inter-function delay.
2) Read the "Decimal
(millisecond).
3) Read the "Validate" barcode on the same page to complete this setting.

2.4.4 HID CHARACTER TRANSMIT MODE

By default, HID interface sends data to the host in batch. You may have the scanner read
the "By Character" barcode to process data one character at a time.
Value" barcode on page 217 for the desired inter-function delay
Chapter 2
Value Delay Time
195 ~ 204 200 millisecond
205 ~ 214 210 millisecond
215 ~ 224 220 millisecond
225 ~ 234 230 millisecond
235 ~ 244 240 millisecond
245 ~ 254 250 millisecond
Inter-Function
Delay... (*0~254)
*Batch Processing
By Character
Update
Selecting Output Interface
77