Release Notes - CipherLab 1660 User Manual

RELEASE NOTES

Version Date
1.15 Jan. 07, 2011
1.14 Nov. 26, 2010
1.13 May 12, 2010
1.12 Apr. 09, 2010
Notes
Modified: add support for 1661 to send memory data via Direct USB
Modified: Introduction, Product Highlights — add CipherConnect
New: 1.13 1661 Using Direct USB Cable
New: 1.14 Hardware Reset
Modified: 4.10 GS1-128 (EAN-128) — Cannot read when disabled
since firmware v1.30 for 1660
Modified: 5.6.1 Edit a Concatenation of Barcodes — Code type for
ISBT 128
New: 6.4.5 Pause Field Setting
Modified: 6.5 Configuring Format — Define Transmission Sequence
(add Pause Field, Null Character Field )
New: add 1661, Direct USB for charging only (Direct USB allows no
data transmission except for firmware upgrade)
Modified: Introduction — Charging indication on 1661; charging via
battery charger
Modified: Introduction, Symbologies Supported — add support of
more RSS symbologies
New: Quick Start — Create One-Scan Setup Barcodes (e.g. "109950"
"#@109950#")
Modified: 1.1.2 Auto Power Off & Power-Saving
Modified: 1.2.1 Transmit Buffer — supports 1661
Modified: 1.4 Beeper — describe "Low Battery Alarm"
New: 1.4.4 Low Battery Alarm (1661)
New: 2.1.6 Keypad Support for iPhone/iPad
Modified: 3.2.3 Connect to Dongle — describe random PIN in Step
12
Modified: 4.16 GS1 DataBar (RSS Family)
Modified: 4.16.2 GS1 DataBar Omnidirectional (RSS-14)
Modified: 4.16.3 GS1 DataBar Expanded (RSS Expanded)
Modified: Specifications — 1661 power adaptor
Modified: 5.2 Character
Code/Normal Key
Modified: 2.1.3 Keyboard Settings — BT HID supports "Alphabets
Layout"
Modified: 2.4.2 Keyboard Settings — USB HID supports "Alphabets
Layout"
New: 3.1.3 Configure Related Settings — Sniff Mode
Modified: Appendix III Keyboard Wedge Table — remove settings for
user-defined scan code
Modified: Appendix III Keyboard Wedge Table — provide examples
Substitution — add table for Scan