Lcd Clock Signal Selection (Jp7); Ethernet Tx/Rx/Link Led Connector (Jp8) - Aaeon MB-662 User Manual

LCD Clock Signal Selection (JP7)

The LCD clock control signal is set by using JP7 jumper settings
illustrated as follows:
* Default

Ethernet Tx/Rx/Link LED Connector (JP8)

With ethernet Tx/Rx/Link LED indicator, the ethernet status can be
trace up through LED indicator readings. The pin definitions are
listed as follows:
Pin
1
3
5
18 MB-662 User Manual
Shift Clock
1 2 3
Signal
Rx-LED
Link LED
Tx-LED
* AShift Clock
1 2 3
Pin Signal
2 Vcc
4 Vcc
6 Vcc