Clear Cmos (Jp1); Lcd Panel Voltage Setting (Jp6) - Aaeon MB-662 User Manual

Clear CMOS Selection (JP1)
Safety precautions in setting up clear CMOS must be taken, always
place jumper on protect mode. In clearing CMOS, place jumper for
just a second (follow clear CMOS illustration) then, immediately
return jumper to protect mode.
*
Default

LCD Panel Voltage Setting (JP6)

The LCD panel driving voltage is set by using JP6 jumper settings
illustrated as follows:
* Default
* Protect
1 2 3
5V
1 2 3
Clear CMOS
1 2 3
* 3.3V
1 2 3
Chapter 2 Installation 17