Table of Contents
Advertisement
Windows® 98
Driver installation
1. Install Windows
Click the Start button, go to Settings and click on Control Panel
icon. Then choose the Display and double click on the icon. In the
Display Properties window, click the Setting button from the
Display Type window, and click on Advanced button in the change
display window. Next select the Adapter menu from the many tabs
in the Advanced window. Then select Change from the adapter
menu. A Update Device Driver Wizard will appear, click on the
Next button at the bottom. The next Driver Wizard window will
provide you with two choices, select Display a list of all the
Drivers in a specific location, so you can select the driver you
want. Following select the Have Disk option. You will be asked to
provide the manufacturers file from a certain location, select your
CD-ROM drive and click on Browse.
2. Place the Supporting CD-ROM into your CD-ROM dirve. In the
Select Device window, click on Have Disk, select "Browse" and
find the WIN 98 driver from:
cd-rom : \CD ROM\model name\driver\vga driver\win98
\windows.\Oemsetup.inf
"cd-rom" : the drive letter of your CD-ROM drive
"model name" : the model number of your product
and then click OK. The name of the Chips and Technologies, Inc.
Video Controller driver will appear highlighted in the Modules list
box. Select Chips and Tech. 69000 and Click OK. Click OK to start
the driver installation.
3. Once the installation is complete, the Change Display Type window
will reappear. Click on close to close the window. Then the
Display Properties window will reappear. Click on Apply. Restart
the system for the new settings to take effect.
®
98 as you normally would for a VGA display.
Chapter 4 Driver Installation
95
Advertisement
Table of Contents
