Jacto CONDOR B-12 Operator's Manual page 35

OPERATION AND ADJUSTMENTS
KEMATAL NOZZLES - SERIES 110 UF
EVEN FAN SPRAY
(UNIVERSAL USE)
SPRAY PATTERN ............................................. EVEN FAN
SPRAY ANGLE ................................................. 110 DEGREES AT 15 PSI
MATERIAL ........................................................ KEMATAL
FLOW RATE IDENTIFICATION ........................ NOZZLE COLOR (ISO)
NOZZLE GEOMETRY ....................................... ISO 10.626
110° at 15 PSI
APPLICATIONS
The flat fan nozzles of the Series 110-UF, approved by international standards, are nozzles of
universal use made in Kemtal, a highly resistant and stable polymeric material. These nozzles are
as resistant as those in stainless steel. According to tests carried out by the University of Oregon,
U.S.A., they proved to have useful life of at least 400 hours.
The flow rate is uniform under various temperatures and the spray angle is of 110 degrees.
At low pressure (15 psi), drift is reduced and outstanding spray deposti pattern is achieved with
the generation of large droplets. At high pressure (40 psi) small droplets improve penetration into
and coverage of plants.
TECHNICAL CHARACTERISTICS
LOW PRESSURE
(15 psi)
ANGLE: 110 DEGREES
LARGE DROPLETS
LOW DRIFT
GOOD DISTRIBUTION
35
115 DEGREES AT 30 PSI
120 DEGREES AT 45 PSI
ANGLE: 120 DEGREES
SMALL DROPLETS
BETTER PENETRATION
GOOD COVERAGE OF
HIGH PRESSURE
(40 psi)
LEAVES