Lubrication Table; Lubrication Points - Jacto CONDOR B-12 Operator's Manual

Table of Contents

Advertisement

PRODUCT
LOCATION
PUMP JP-75
PUMP JP-100
LUBRICATING
OIL
PUMP JP-150
PUMP JP-42
PTO SHAFT
GREASE NIPPLES
AGITATOR
GREASE
MANUAL LIFT
HOSE REELS
Spray pump mounted on this sprayer.
NOTE: The presentation order of recommended products does not imply any preference for mark
or product.
STOP THE SPRAYER AND TURN OFF THE TRACTOR ENGINE AND PTO
BEFORE SERVICING ANY PART OF THE EQUIPMENT.
LUBRICATING OIL
PUMP
Check the pump oil level daily and fill it up if necessary.
The first change is to be done after the first 30 working hours.
Further changes are to be done every 100 working hours or in
case of oil contamination.
Use SAE 30 oil, which can be usually acquired in gas stations.
Oil capacity: 1.5 liters to pump JP-75.
Check the oil level through the plug located in the pump cover.
GREASE
PTO SHAFT
Lubricate daily.
FOR INSTRUCTIONS IN DETAIL PLEASE
REFER TO THE SECTION MAINTENANCE -
PTO SHAFT.
MAINTENANCE

LUBRICATION TABLE

FREQUENCY
QTY.
1.5 L
1ST CHANGE:
AFTER 30 HOURS
2.0 L
FURTHER
2.5 L
CHANGES:
EVERY 100
0.9 L
HOURS
DAILY
-
100 HOURS

LUBRICATION POINTS

ATTENTION
45
RECOMMENDED
SPECIFICATIONS
API-SB
ALL INTERNAL COMBUSTION
OR
SUPERIOR
SAE-30
LITHIUM BASE GREASE
NGLI-2
AND SIMILAR PRODUCTS
PRODUCTS
ENGINES WITHIN THIS
SPECIFICATION
MULTIFAK EP-2
MOBILGREASE 77
LUBRAX GMA-2
BEACON EP-2
filling opening
plug
Oil

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Condor bx-12Condor em

Table of Contents