Table of Contents
Advertisement
MAIN OF COMPONENTS OF SPRAYER
FOAM MARKER (OPTIONAL)
This accessory is specifically designed to mark off the application band width with foam so as
to prevent overlaps and skips when spraying back.
The ideal conditions for using the foam marker are the same for spraying, that is:
- Cool weather;
- No strong and dry wind.
filter
tank
Further information about the Mastermark foam marker can be obtained in the attached manual
for this accessory.
CLEAN WATER TANK (OPTIONAL)
This is a plastic container with capacity of 12
liters.
Located in an easily reached position, it must
always be filled up with clean water for washing
hands and other parts of the body that may have
touched chemicals when preparing the chemical
mixture.
ATTENTION: USE THIS WATER ONLY TO
WASH HANDS AND OTHER PARTS OF THE
BODY THAT HAVE TOUCHED CHEMICALS.
DO NOT DRINK THIS WATER IN ANY EVENT!
PTO SHAFT
It has plastic shields along all its parts to provide more security to the operator. These shields
prevent the rotating parts from contacting the operator and his clothes and plants as well. Do not
remove the shields.
control
valve
compressor
fuse
tank
17
foam nozzle
tap
NOTE:
For instructions in detail,
please refer to the section
MAINTENANCE - PTO
SHAFT.
Hide quick links:
Advertisement
Table of Contents
