Jacto CONDOR B-12 Operator's Manual page 23

- ADJUSTING PARTS TO HITCH TO THE TRACTOR'S THREE-POINT SUSPENSION
THIRD POINT FRAME
The third point frame has two positions (1 and 2) to install the third arm and two positions to
install the frame lower pin.
Thus there are four different positions for this assembly.
HOLES POSITION
The positions of the holes vary according to the duty to be
done.
Third arm's
position
No. 1
No. 1
No. 2
No. 2
STABILIZING CHAINS
The stabilizing chains should be installed to limit the sideward movement of the sprayer hitched
to the three-point system.
These chains should be adjusted according to the booms of the sprayer to be used. To adjust
them, relieve the lock nut (1) and turn the adjusting nut (2), as necessary, and retighten the lock
nut.
SETTING UP TRACTOR
Frame
Duty kind
No. 4 Ultra-light
No. 3
No. 4
Medium
No. 3
Light
Heavy
23