Operating Jvc's Audio/Video Components - JVC RX-778VBK Instruction Manual

Operating JVC's Audio/Video Components

You can operate JVC's audio and video components with this receiver's remote control, since control signals for JVC
components are preset in the remote control.
IMPORTANT:
To operate JVC's audio components using this remote control:
• You need to connect JVC audio components through the
COMPU LINK-3 (SYNCHRO) jacks (see page 33) in
addition to the connections using cables with RCA pin plugs
(see page 6).
• Aim the remote control directly at the remote sensor on the
receiver.
• If you use the buttons on the front panel or the menu
function to choose a source, the remote control will not
operate that source. To operate a source with the remote
control, the source must be selected using source selecting
buttons on the remote control.
• To operate the cassette deck or MD recorder using the
COMPU LINK remote control system, set the source name
correctly. (See page 12.)
• Refer also to the manuals supplied with your components.
STANDBY ON
TV/CATV/DBS VCR
POWER POWER
DVD CD TAPE/MD
TV/DBS PHONO FM/AM
VCR ANALOG/DIGITAL SLEEP
SURROUND CNTR
1 2 3
ON/OFF
MENU
TEST REAR•L
SURROUND
4 5 6
MODE
ENTER
DISC EFFECT REAR•R
7 8 9
/P
SOUND SEA MODE SUBWOOFER
0 +10
10
RETURN FM MODE/MUTING 100+
AUDIO/
TV/VCR
MENU
CATV/DBS
SET
TEXT
EXIT
DISPLAY
TV VOL CHANNEL VOLUME
TV/VIDEO VCR TAPE MUTING
CONTROL
/REW PLAY
FF/
DOWN TUNING UP
REC STOP PAUSE
RM-SRX778J REMOTE CONTROL
Tuner
After pressing FM/AM (with the remote control mode selector set to
"AUDIO/TV/VCR"), you can perform the following operations:
FM/AM:
Alternates between FM and AM.
1 – 10, +10: Selects a preset channel number directly.
For channel number 5, press 5.
For channel number 15, press +10, then 5.
For channel number 20, press +10, then 10.
TUNING UP/TUNING DOWN:
Tunes into stations.
FM MODE/MUTING: Changes the FM reception mode.
AUDIO/
TV/VCR
CATV/DBS
Check to see if its remote
control mode selector is set
to the correct position.
To operate the audio
system, TVs, and VCRs,
set it to "AUDIO/TV/VCR."
Sound control section (Amplifier)
You can always perform the following operations (with the remote
control mode selector set to "AUDIO/TV/VCR"):
SURROUND ON/OFF: Turns on or off the Surround modes —
Dolby Pro Logic and Dolby Digital.
SURROUND MODE: Selects the DSP modes.
After pressing SOUND (with the remote control mode selector set to
"AUDIO/TV/VCR"), you can perform the following operations:
SEA MODE: Changes the SEA modes.
SUBWOOFER – / +:
Adjusts the subwoofer output level.
CNTR – / +: Adjusts the center speaker output level.
REAR•L – / +:
Adjusts the left rear speaker output level.
REAR•R – / +:
Adjusts the right rear speaker output level.
EFFECT: Selects the effect level.
TEST:
Turns on or off the test tone output.
Note:
After adjusting sounds, press the corresponding source selecting
button or DISC to operate your target source by using the 10 keys;
otherwise, the 10 keys cannot be used for operating your target
source.
CD player
After pressing CD (with the remote control mode selector set to
"AUDIO/TV/VCR"), you can perform the following operations on
the CD player:
PLAY: Starts playing.
4 : 4 4 4 4
Returns to the beginning of the current (or previous)
track.
¢ ¢ : ¢ ¢ ¢
Skips to the beginning of the next track.
STOP: Stops playing.
PAUSE:
Pauses playing. To release it, press PLAY.
1 – 10, +10: Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
CD player-changer
After pressing DISC (with the remote control mode selector set to
"AUDIO/TV/VCR"), you can perform the following operations on a
CD player-changer:
PLAY:
Starts playing.
4 : 4 4
4 4
Returns to the beginning of the current (or previous)
track.
¢ : ¢ ¢
¢ ¢
Skips to the beginning of the next track.
STOP:
Stops playing.
PAUSE: Pauses playing. To release it, press PLAY.
1 – 6, 7/P:
Select the number of a disc installed in a CD player-
changer.
After pressing CD (with the remote control mode selector set to
"AUDIO/TV/VCR"), you can perform the following operations on
the CD player-changer:
1 – 10, +10: Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
41