Showing The Disc Information On The Tv Screen - JVC RX-778VBK Instruction Manual

OPERATIONS:
To use this remote control system, you need to connect the TV to the
MONITOR OUT jack on the rear panel (see page 7), and set the
TV's input mode to the proper position to which the receiver is
connected. Make sure you have connected the CD player or
MD recorder equipped with the TEXT COMPU LINK
remote control system. If not, you cannot use the
following functions.
On-Screen Operation buttons (on the remote control)
STANDBY ON
TV/CATV/DBS VCR
POWER POWER
DVD CD TAPE/MD
TV/DBS PHONO FM/AM
VCR ANALOG/DIGITAL SLEEP
SURROUND CNTR
1 2 3
ON/OFF
MENU
SURROUND TEST REAR•L
MODE 4 5 6
ENTER
DISC EFFECT REAR•R
7 8 9
/P MENU
SOUND SEA MODE SUBWOOFER
10 0 +10
RETURN FM MODE/MUTING 100+
AUDIO/
TV/VCR
MENU
CATV/DBS
SET
TEXT
EXIT
DISPLAY
EXIT
TV VOL CHANNEL VOLUME
TV/VIDEO VCR TAPE MUTING
CONTROL
/REW PLAY
FF/
DOWN TUNING UP
REC STOP PAUSE
RM-SRX778J REMOTE CONTROL
Showing the Disc Information on the TV
Screen
Press TEXT DISPLAY while "CD" or "MD" is
selected as the source.
The Disc Information screen appears on the TV.
SET
TEXT
DISPLAY
Note on 7 :
The following information will appear on the display:
• For CD Text:
• For MD: only Disc Title will appear
Only recorded information will be shown. If there is no data, "NO
DATA" will appear.
Note on 9 :
For example, the SET button will be used to start play (PLAY), to go to
the next screen (ENTER), and to determine the selection (ENTER).
To exit from the Disc information screen:
Press EXIT.
Notes:
• The on-screen display will disappear in the following case:
• To control the MD recorder using the TEXT COMPU LINK remote
• Some special characters and marks cannot be displayed correctly.
1 Source name: CD or MD
2 Select or , then press SET to change the disc.
3 Track numbers and track titles.
• The current playing (selected) track is indicated in
yellow.
• When you move to a track number, you can
change the track information by pressing @ / #. Each
time you press the button, track information alternates
between its track title and its performer. (You can also
start playing the track by pressing SET.)
4 Select this (move in front), then press SET to go to
the DISC SEARCH screen (see page 36).
5 Select this (move in front), then press SET to go to
the TITLE INPUT screen (see page 37).
6 This appears only when a CD Text is selected.
7 Disc information such as the disc title, performer, and
music genre.
When this is selected (
disc information by pressing @ / #. Each time you press
the button, disc information (see "Note on 7") changes.
8 Select or , then press SET to change the track.
9 Usable buttons and their functions for the current
selection.
Indication here will be changed according to what is
currently selected ( in front) on the screen. See "Note
on 9."
– Disc title
– Performer
– Genre
– Song writer
– Composer
– Arranger
– Message
– if no operation is done for about 10 minutes.
– if you do any operation other than explained in this section.
control system, you have to change the source name shown on the
display from "TAPE" to "MD." (See page 12.)
in front), you can change the
35