Av Compu Link Remote Control System - JVC RX-778VBK Instruction Manual

AV COMPU LINK Remote Control System

The AV COMPU LINK remote control system allows you to operate JVC video components (TV, VCR, and DVD player)
through the receiver.
To use this remote control system, you need to connect the video components you want to operate, follow the diagrams below and the
procedure on the next page.
CONNECTIONS 1:
VCR
VHS
AV
COMPU LINK
IMPORTANT:
Connect to the terminal indicated in the
illustration.
DO NOT connect to the TV terminal.
CONNECTIONS 2:
CASE1: If the DVD player is equipped with the S-video
terminals
TV
VIDEO
VIDEO S-VIDEO
DVD
OUT
(REC)
VCR
IN
(PLAY)
To Video input 1
MONITOR
OUT
To Video input 2
DVD player
DVD
AV
COMPU LINK
AV
COMPU LINK
DO NOT use these video terminals.
DVD player
DVD
VCR
S-VHS
TV
If the AV COMPU LINK terminal
on the TV is "RECEIVER/AMP"
COMPU LINK
RECEIVER/AMP
EX
(VCR)
If the AV COMPU LINK terminal
on the TV is "AV COMPU LINK
EX"
AV
COMPU LINK EX
CASE2: If the DVD player is not equipped with the S-video
terminals
DO NOT use these video terminals.
DVD player
DVD
VCR
S-VHS
CAUTION:
The AV COMPU LINK remote
control system cannot control the
DBS tuner connected to the TV
SOUND/DBS jacks.
AV
RECEIVER/
AMP
Notes:
• When connecting only the
VCR or DVD player to this
receiver, connect it directly to
the receiver using cable with
the monaural mini-plugs.
• Refer also to the manual
supplied with your video
components.
VIDEO
VIDEO S-VIDEO
DVD
OUT
(REC)
VCR
IN
(PLAY)
To Video input 2
MONITOR
OUT
TV
39