Basic Operations; Turning The Power On And Off (Standby); Selecting The Source To Play - JVC RX-778VBK Instruction Manual

Basic Operations

The following operations are commonly used when you play any sound source.
IMPORTANT:
When using the remote control, check to see if its
remote control mode selector is set to the correct
position:
To operate an audio system, TV, and VCR, set it
to "AUDIO/TV/VCR."
To operate a CATV converter and DBS tuner,
set it to "CATV/DBS."

Turning the Power On and Off (Standby)

On the front panel:
To turn on the power, press POWER.
The STANDBY lamp goes off. The name of the
current source (or station frequency) appears on
the display.
Current source name appears
100 1k 10k
Current volume level is shown here
To turn off the power (into standby mode),
press POWER again.
The STANDBY lamp lights up. A small amount
of power is consumed in standby mode. To turn
the power off completely, unplug the AC power
cord.
From the remote control:
To turn on the power, press AUDIO
POWER ON.
The STANDBY lamp goes off. The name of
the current source (or station frequency)
appears on the display.
To turn off the power (into standby mode),
press AUDIO POWER STANDBY.
The STANDBY lamp lights up.

Selecting the Source to Play

On the front panel:
Turn SOURCE SELECTOR until the source
name you want appears on the display.
• As you turn the selector, the source changes as
follows:
CD O PHONO O TAPE (or MD) O FM O
AM O DVD O TV SOUND (or DBS) O
VCR O (back to the beginning)
The selected source lamp also lights up.
From the remote control:
Press one of the source selecting buttons.
AUDIO/
TV/VCR
CATV/DBS
STANDBY
POWER
DVD
CD*
TAPE/MD*
VOLUME
TV/DBS
PHONO*
FM/AM*
STANDBY
POWER
VCR
Notes:
• When connecting an MD recorder (to the TAPE/MD jacks), and a
STANDBY ON
• When you press one of the source selecting buttons on the remote
STANDBY ON
SOURCE SELECTOR
DVD CD
TV SOUND/DBS PHONO
VCR TAPE/MD
FM
AM
DVD
TV/DBS PHONO
VCR
Selected source name appears
CH–
S E A FR
L C R
D S P
LEE 3D-PHONC
LS S RS
100 1k 10k
Select the DVD player.
Select the CD player.
Select the cassette deck (or the MD recorder).
• Select TV sounds when the remote control mode
selector is set to "AUDIO/TV/VCR."
• Select the DBS tuner when the remote control
mode selector is set to "CATV/DBS."
Select the turntable.
Select an FM or AM broadcast.
• Each time you press the button, the band alternates
between FM and AM.
Select the video component connected to the VCR
jacks.
DBS tuner (to the TV SOUND/DBS jacks), change the source name
shown on the display. For details, see page 12.
control marked above with an asterisk ( * ), the receiver
automatically turns on.
CD TAPE/MD
FM/AM
EON
TA
NEWS
THEATER
INFO
LIVE CLUB ACTION
VOLUME
DANCE CLUB MUTE AUTO
HALL LOUDNESS
PAVILION ATT SLEEP
9