Operating Other Manufacturers' Video Equipment - JVC RX-778VBK Instruction Manual

Operating Other Manufacturers' Video Equipment

This remote control supplied with the receiver can transmit control
signals for other manufacturers' VCRs, TVs, CATV converters and
DBS tuners. By changing the transmittable signals from preset ones
to the other manufacturers', you can operate the other
manufacturer's components using this remote control.
When operating the other manufacturers' components, refer also to
the manuals supplied with them. To operate these components with
the remote control, first you need to set the manufacturer's code
each for VCR, TV, CATV converters, and DBS tuner.
STANDBY ON
TV/CATV/DBS VCR
POWER POWER
DVD CD TAPE/MD
TV/DBS PHONO FM/AM
VCR ANALOG/DIGITAL SLEEP
SURROUND CNTR
1 2 3
ON/OFF
MENU
TEST REAR-L
SURROUND
4 5 6
MODE
ENTER
DISC
EFFECT REAR-R
7 8 9
/P
SOUND SEA MODE SUBWOOFER
0
10 +10
RETURN FM MODE/MUTING 100+
AUDIO/
TV/VCR
MENU
CATV/DBS
SET
TEXT
EXIT
DISPLAY
TV VOL CHANNEL VOLUME
TV/VIDEO VCR TAPE MUTING
CONTROL
/REW PLAY
FF/
DOWN TUNING UP
REC STOP PAUSE
RM-SRX778J REMOTE CONTROL
AUDIO/
TV/VCR
CATV/DBS
Check to see if its remote
control mode selector is set
to the correct position.
To operate the audio
system, TVs, and VCRs,
set it to "AUDIO/TV/VCR."
To operate the CATV
converter and DBS tuner,
set it to "CATV/DBS."
To change the transmittable signals for
operating another manufacturer's TV
1. Set the remote control mode to "AUDIO/TV/
VCR."
2. Press and hold TV/CATV/DBS POWER.
3. Press TV/DBS.
4. Enter manufacturer's code (two digits) using
buttons 1 – 9, and 0.
See the list below.
Examples: For a JVC product, press 0, then 1.
For a Hitachi product, press 1, then 0.
5. Release TV/CATV/DBS POWER.
The following buttons can be used for operating the TV (with
the remote control mode selector set to "AUDIO/TV/VCR"):
TV/CATV/DBS POWER: Turns on and off the TV.
TV VOL +/–:
TV/VIDEO:
After pressing TV/DBS (with the remote control mode selector
set to "AUDIO/TV/VCR"), you can perform the following
operations on a TV:
CHANNEL +/–:
1 – 10, 0, 100+ (+10):
Note:
Refer to the manual supplied with your TV.
6. Try to operate your TV by pressing TV/CATV/
DBS POWER.
When your TV turns on or off, you have entered the correct
code.
If there are more than one code listed for your brand of TV,
try each one until the correct one is entered.
Manufacturer Code
JVC 01
HITACHI 10
MAGNAVOX 02
MITSUBISHI 03
PANASONIC 04, 11
RCA 05
Manufacturers' codes are subject to change without notice.
If they are changed, this remote control cannot operate the
equipment.
Adjusts the volume.
Sets the input mode (either TV
or VIDEO).
Changes the channels.
Selects the channels.
100+ (+10) button will function as
the ENTER button if your TV
requires pressing ENTER after
selecting a channel number.
Manufacturer Code
SAMSUNG 12
SANYO 13
SHARP 06
SONY 07
TOSHIBA 08
ZENITH 09
43