Storing The Preset Stations; Assigning Names To Preset Stations - JVC RX-778VBK Instruction Manual

Storing the Preset Stations (Also see page 17)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
CONTROL," then press @ / #.
The TUNER CONTROL menu appears.
3. Tune into a station on the TUNER CONTROL
menu, referring to "Operating the Tuner" on the
previous page.
4. Press % / fi to move
to "PRESET
MEMORY," then press
@ / #.
The PRESET MEMORY
menu appears.
5. Press @ / # to select a
preset station number
you want.
6. Press SET to store the setting.
7. When you finish, press EXIT repeatedly until the
menu disappears from the TV.

Assigning Names to Preset Stations

(Also see page 18)
1. Press MENU.
The MAIN MENU appears on the TV.
• Pressing one of the % / fi / @ / # buttons also displays the
MAIN MENU.
2. Press % / fi to move
CONTROL," then press @ / #.
The TUNER CONTROL menu appears.
3. Press % / fi to move
4. Press @ / # to select a preset station.
5. Press % / fi to move
to "PRESET
MEMORY," then press
@ / #.
The PRESET MEMORY
menu appears.
32
to "TUNER
to "TUNER
to "PRESET CH."
6. Press % / fi to move
to "PRESET NAME,"
then press SET.
The character entry screen
appears.
7. Press % / fi / @ / # to
move in front of a
character you want.
You can also select the following:
: To enter space
: To erase the character
: To go back to the previous character position or go
to the next character position
8. Press SET to enter the
selected character.
9. Repeat steps 7 and 8 to
enter up to four
characters.
10.Press % / fi / @ / # to
move to "PRESET
NAME," then press
SET to store the setting.
The TUNER CONTROL menu
appears again.
11.When you finish, press EXIT repeatedly until the
menu disappears from the TV.