Table of Contents
Advertisement
30/ENGINE - WORK ON INDIVIDUAL PARTS
Checking the electric starter mode
19.37
–
Check the gear mesh and bearing of starter idler gear
»
If there is damage or wear:
–
Change the starter idler gear.
–
Check the gear mesh and bearing of torque limiter
»
If there is damage or wear:
–
Change the torque limiter.
–
Check the gear mesh and bearing of freewheel gear
»
If there is damage or wear:
–
Change the freewheel gear or bearing.
–
Check free wheel
for damage and wear when it is disassembled.
»
If there is damage or wear:
–
Change the free wheel.
–
Checking the gear mesh of starter motor
»
If there is damage or wear:
–
Change the starter motor.
–
Change O-ring
of the starter motor.
–
Connect the negative cable of a 12 volt power supply to the housing of the starter motor. Briefly connect the positive cable of the
power supply with the connector of the starter motor.
»
If the starter motor does not turn when the circuit is closed:
–
Change the starter motor.
4
4
3
3
for damage and wear.
for damage and wear.
for damage and wear.
for damage and wear
5
5
6
6
2
2
1
1
301211-01
136
Advertisement
Table of Contents
