31/CARBURETOR
–
Check/adjust the accelerator pump. (
–
Position seal ring
Info
The label on the membrane must be visible when the membrane is
mounted.
301566-10
–
Position seal ring
out.
301565-10
–
Position the accelerator pump cover. Mount and tighten screws
Guideline
Other screws, carburetor
301551-11
–
Position and mount the bleeder hoses.
–
Position the hose holder. Mount screws
pattern.
Guideline
Other screws, carburetor
–
Adjust the position of the throttle position sensor. (
301561-01
p. 170)
, membrane
and spring
in the accelerator pump cover with the rounded side facing
M4
and tighten all screws in a crisscross
M4
.
.
2 Nm (1.5 lbf ft)
2 Nm (1.5 lbf ft)
p. 174)
177