Table of Contents
Advertisement
04/SHOCK ABSORBER, SWINGARM
–
Note down the present state of rebound damping
–
Completely open the adjusters of the rebound and compression damping.
201133-10
–
Remove rubber cap
–
Slowly open screw
The pressurized nitrogen is bled off.
201134-10
–
Remove screw
–
Bleed and fill the damper of the front shock absorber. (
–
Fill the damper of the front shock absorber with nitrogen. (
201218-10
–
Mount rubber cap
201150-11
Alternative 1
–
Turn adjusting screw
–
Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Rebound damping
Comfort
Standard
201133-10
Sport
–
Turn adjusting screw
click.
–
Turn back counterclockwise by the number of clicks corresponding to the shock
absorber type.
Guideline
Compression damping, low-speed
Comfort
Standard
Sport
of the reservoir.
.
. Let the oil drain out.
of the reservoir.
clockwise up to the last perceptible click.
clockwise with a screwdriver up to the last perceptible
and compression damping
p. 34)
p. 37)
20 clicks
15 clicks
12 clicks
20 clicks
15 clicks
12 clicks
26
.
Advertisement
Table of Contents
