30/DISASSEMBLING THE ENGINE
Removing the shift drum locating unit
18.30
Removing the locking lever
18.31
Removing the left section of the engine case
18.32
–
Remove screw
–
Push away locking lever
drum locating unit.
–
Relieve tension from the locking lever.
301661-10
–
Unscrew
301662-10
–
Remove screws
–
Remove screws
–
Tilt the left section of the engine case upward and remove the threaded fasteners
of the engine fixing arm.
301663-10
–
Insert the special tool into the crankshaft.
Protection cover (75029090000) (
–
Mount special tool
Extractor (83529048000) (
Info
Use the drill hole marked with 835.
301690-10
–
Take off the section of the engine case.
Info
Do not subject the section of the engine case to any stress.
The washer of the main shaft usually adheres to the bearing.
–
Take off the left section of the engine case.
–
Remove the special tool.
.
from shift drum locating unit
and remove together with locking lever
.
.
p. 230)
with the appropriate screws.
p. 237)
115
and remove the shift
, washer, sleeve and spring.