30/DISASSEMBLING THE ENGINE
Removing the starter idler gear/torque limiter
18.9
Removing the shift shaft
18.10
Removing the shift drum locating
18.11
Removing the locking lever
18.12
Removing the oil pump gear
18.13
–
Remove lock ring
Circlip pliers reverse (51012011000) (
–
Take off disk
–
Remove torque limiter
600198-01
–
Press sliding plate
the washer.
600199-10
–
Remove screw
–
Press locking lever
locating.
–
Release the locking lever.
600200-11
–
Undo screw
spring.
600271-10
–
Remove shaft retainer
–
Remove washer
Info
Make sure that the pin remains in place.
600202-10
.
and starter idler gear
.
with bearing bolt
away from the shift drum locating. Remove shift shaft
.
away from shift drum locating
and take off it together with locking lever
.
, oil pump gear
and pin.
P. 207)
and both needle bearings.
and take off the shift drum
, washer, sleeve and
90
with