Seagull Models Seagull 2000 Assembly Manual page 6

SEAGULL.
Wing.
Small weight.
String.
Attach the string to the servo lead and carefully thread it though the wing.
6
2) A string has been provided in the wing to
pull the aileron lead through to the wing root.
Remove the string from the wing at the servo
location and use the tape to attach it to the
servo extension lead. Pull the lead through the
wing and remove the string.
Wing rib.
3) Set the aileron hatch in place and use a
Phillips screw driver to install it with four wood
screws.
AILERON PUSHROD HORN INSTALLATION
Instruction Manual.
M2x6mm.
M2x10mm.