Start Switch - Qlink RD400 User Manual

Start switch "

"
The starter motor cranks the engine when this switch
is pushed.
See starting instructions prior to starting the engine.
(See page 43 for details).
USER'S MANUAL
① Four-wheel drive switch "2WD/4WD"
On-command four-wheel drive switch "2WD
/4WD"
To change from two-wheel drive (2WD) to four-wheel drive
(4WD), stop theATVand set the switch to the 4WD position.
To change from four-wheel drive (4WD) to two-wheel drive
(2WD), stop theATV and set the switch to the 2WD position.
18