HANDLEBAR&SWITCH
LEFT HANDLEBAR
Engine stop switch 1
"OFF"position
The engine can not be
started,
"RUN"position
The engin e can be started.
Rear brake lever 2
Apply the rear brake by sq ueez ing the rear brake lever
towards the grip.
Electric starting button 3
RIGHT HANDLEBAR
Throttle lever 1
C o n t r o l t h e e n g i n e
rotating speed with the
throttle lever.
Operate this lever with
your thumb. Push it forward
USER'S MANUAL
to increase eng in e rot ati ng
speed.Release it to decrease
engine speed.
Front brakelever 2
Throttle adjusting
screw 3
Use the throttle adjusting screw to restrict maximum
speed of the ATV Adjust this limiter according to the
,
rider s skill and experience.
HAND-DRAUGHT FLAMEOUT SWITCH
This switch is on left side
lf the frame.When you pull
out it,the engine can not be
started. On the contrary,
the engine can be started
normally after you insert
the switch
9