Crossing A Slope - Qlink RD400 User Manual

CROSSING A SLOPE

Traversing a sloping surface on your ATV re uires you
to properly position your weight to maintain proper
balance. Be sure that you have learned the basic riding
skills on flat ground before attempting to cross a sloping
surface. Avoid slopes with slippery surfaces or rough
terrain that may upset your balance.
As you travel across a slope, lean your body in the uphill
direction. It may be necessary to correct the steering
when riding on loose surfaces by pointing the front
wheels slightly uphill. When riding on slopes be sure
not to make sharp turns either up or down hill.
If your ATV does begin to tip over, gradually steer in the
downhill direction if there are no obstacles in your path.
As you regain proper balance, gradually steer again in the
direction you wish totravel.
USER'S MANUAL
q
POTENTIAL HAZARD
Improperly crossing hills or turning onhills.
WHAT CAN HAPPEN
Could cause loss of control or cause the ATVto overturn.
HOW TO AVOID THE HAZARD
Never attempt to turn theATV around on any hill until you
have mastered the turning technique as described in the.
Owner Manual on level ground. Be very careful when turning
on any hill.
Avoid crossing the side ofa steep hill ifpossible.When crossing
the side of a hill:
Always follow proper procedures as de scribed in the Owner
Manual.
Avoid hills with excessively slippery or loose surfaces.
Shift your weight to the uphill side of the ATV .
87