Qlink RD400 User Manual page 136

2. Turn in the adjusting nut on brake cable toprovide a
gap of 0-1 mm (0-0.04 in) between the brake
camshaft lever and the pin.
①
Adjusting nut (brake lever cable) a Gap
USER'S MANUAL
3. Turn the adjusting bolt at the brake lever until the free
play at the brake lever pivot is 3-5mm (0.12-0.20 in).
4. Tighten the locknut.
130
① ②
Locknut Adjusting bolt
a Rear brake lever free play