Qlink RD400 User Manual page 50

NOTE:
When the drive select lever is in the neutral position,
the neutral indicator light should come on. If it does
not come on, ask a ATV dealer to inspect the electric
circuit.
The engine can be started in any gear if the brake pedal
is applied. However, it is recommended to shift into
neutral before starting the engine.
5. Use the starter (choke) in reference to the figure:
Position 1 : Cold engine start ambient temperature
below 5 °C (40 F). °
Position 2 : Cold engine start ambient temperature
° ° ° °
at 0 C (30 F) 30 C (90 F) and warming up
position.
USER'S MANUAL
Position 3: Cold engine start ambient temperature
above 25 C (80 F) and warm engine start position.
AMBIENT TEMP./STARTER(CHOKE)
POSITION
a Starter (choke)
①
Fully open
②
Half open
③
Closed
6. Completely close the throttle lever and start the engine
by pushing the start switch.
44
° °