Qlink RD400 User Manual page 13

Always follow proper procedures for climbing hills as described in this manual. Check the ter
start up any hill. Never climb hills with excessively slippery or loose surfaces. Shift your weight forward. Never
open the throttle suddenly. Never go over the top of a hill at high speed.
Always follow proper procedures for going down hills and for braking on hills as described in this manual. Check
the terrain carefully before you start down any hill. Shift your weight back ward. Never go down a hill at high speed.
Avoid going down a hill at an angle that would cause the vehicle to lean sharply to one side. Go straight down the hill
where possible.
Always follow proper procedures for crossing the side of a hill as described in this manual. Avoid hills with excessively
slippery or loose surfaces. Shift your weight to the uphill side of the ATV . Never attempt to turn the ATV around
on any hill until you have mastered the turning technique described in this manual on level ground. Avoid
crossing the side of a steep hill if possible.
Always use proper procedures if you stall or roll backwards when climbing a hill. Maintain a steady speed when
climbing a hill. If you stall or roll backwards, follow the special procedure for braking described in this manual.
Dismount on the uphill side or to a side if pointed straight up-hill. Turn the ATV around and remount, following
the procedure described in this manual.
Always check for obstacles before operating in a new area. Never attempt to operate over large obstacles such as
large rocks or fallen trees.Always follow proper procedures when operating
USER'S MANUAL
7
rain carefully before you
over obstacles as described in this manual.
,