Cleaning And Storage; Cleaning - Qlink RD400 User Manual

CLEANING AND STORAGE

A. CLEANING
Frequent, thorough cleaning of your machine will not
only enhance its appearance but will improve its general
performance and extend the useful life of many components.
1. Before cleaning the machine:
a. Block off the end of the exhaust pipe to prevent water
entry. A plastic bag and strong rubber band may be
used.
b. Make sure the spark plug and all filler caps are properly
installed.
2. If the engine case is excessively greasy,apply degreaser
with a paint brush. Do not apply degreaser to the
wheel axles.
3. Rinse the dirt and degreaser off with a garden hose.
Use only enough pressure to do the job.
USER'S MANUAL
Excessive water pressure may cause water seepage and
deterioration of wheel bearings, brakes, transmission
seals and electrical devices.
Many expensive repair bills have resulted from improper
high pressure detergent applications such as those available
in coinoperated car washers.
4. Once the majority of the dirt has been hosed off, wash
all surfaces with warm water and mild, detergent-
type soap. An old toothbrush or bottle brush is handy
forhard-to-get-at places.
5. Rinse the machine off immediately with clean water
and dry all surfaces with a chamois, clean towel or
soft absorbent cloth.
146