Battery Maintenance; Fuse Replacement - Qlink RD400 User Manual

Battery maintenance

1. When the machine is not used for a month or longer,
remove the battery and store it in a cool, dark place.
Completely recharge the battery before
reinstallation.
A special battery charger (constant voltage/ampere or
constant voltage) is required for recharging a sealed-type
battery. Using a conventional battery charger may shorten
the battery life.
2. Always make sure the connections are correct when
putting the battery back in the machine.
USER'S MANUAL

Fuse replacement

1. The main fuse case and the fuse box are located under
the seat.
2. If a fuse is blown, turn off the main switch and install
a new fuse of the specified amperage. Then turn on
the switches. If the fuse immediately blows again,
consult a ATV dealer.
137