Maintenance Description - Sym Joyride 125 Service Manual

Maintenance Description

Operational precautions
Caution
Inhaling asbestos may cause disorders of respiration system or cancer, therefore, never use air
hose or dry brush to clean brake parts. Use vacuum cleaner or other authorized tool instead.
The brake calliper can be removed without removing the hydraulic system.
After the hydraulic system is removed, or the brake system is felt to be too soft, bleed the
hydraulic system.
While refilling brake fluid, care should be taken not to let the foreign material entering into the
brake system.
Do not spill brake fluid on the painted surfaces, plastic or rubber parts to avoid damage.
Check the operation of the brake system before riding.
Specifications
The thickness of front and rear brake disc
Front and rear brake disc eccentricity
Master cylinder inner diameter
Master cylinder outer diameter
Diameter of front disc
Diameter of rear brake drum
Thickness of front brake lining
Thickness of rear brake lining
Torque values
Brake hose bolt
Bolt for brake caliper
Bolts for the lining guide pin
Bolts for the lining guide pin cap
Air-bleed valve
To this chapter contents
Item
：
3.5 kg-m
: 3.3 kg-m
：
1.8 kg-m
：
1.0 kg-m
：
0.55 kg-m
15. Brake System
Standard (mm)
4.000
< 0.100
11.000 - 11.043
10.957 - 10.984
273.000
200.000
5.100
5.100
Limit (mm)
2.500
0.300
11.055
10.945
-
-
2.000
2.000
15-3