Sym Joyride 125 Service Manual page 253

To this chapter contents
18. Electrical System
Taillight / brake light / rear winker
replacement
Remove the seat / luggage box.
(Refer to chapter 14)
Remove the seat open solenoid valve
assembly (2 bolts).
2 bolts
Rotate the brake light bulb and remove it.
Replace the brake light bulb if necessary.
Taillight / brake light bulb
Rotate the rear winker bulb and remove it.
Winker bulb
Replace the winker bulb if necessary.
Specification：
Taillight / brake light 12V 5W / 21W
Winker bulb 12V 21W
Installation
Install in the reverse order of removal.
18-16