Calculated Industries Construction Master IV User Manual page 6

[Inch]
[/]
[Cu]
[Sq]
[m]
[cm]
6 — C
ONSTRUCTION
Inches — This is an entry and con-
version key (when used with
[Conv]). This key can also be used
in conjunction with the [/] key for
entering values in Fractional Inch
format.
Fraction Bar — This key is used to
enter fractions. For example, to
enter 1/2, the key sequence would
be: 1 [/] 2.
Cubic — This key is used with a
dimension key to identify a value
as being a volume.
Example: 5 [Cu] [Yds].
Square — This key is used with a
dimension key to identify a value
as being an area.
Example: 10 [Sq] [Meters].
Meters — This is an entry and con-
version key used to enter decimal
meters or to convert decimal
meters.
Centimeters — Entry and conver-
sion key for centimeters. Operates
the same as metric.
M
ASTER
®