Key Definitions/Functions; Basic Functions - Calculated Industries Construction Master IV User Manual

G
ETTING

KEY DEFINITIONS/FUNCTIONS

Basic Functions

[+] [–] [x]
[÷] [=]
[%]
0 – 9
[ • ]
[Off ]
[On/C] Turns on power. Pressing once
[Conv] Used to convert between dimen-
S
TARTED
Arithmetic operation keys.
Four-function percent key.
Digits used for keying-in numbers.
Decimal point.
Turns all power off. Resets the dis-
play and all non-permanent registers.
clears the last entry and the dis-
play. Pressing twice in succession
clears all temporary registers.
sions. Dimensions can only be con-
verted within the same convention
(i.e., linear, square or cubic). Also
used to access special functions.
3 — User's Guide