Right Crankcase Cover Removal; A.c.g. Set Removal; Flywheel Removal - Sym MAXSYM 400i Service Manual

To this chapter contents
10. AC Generator / Starting Clutch

Right Crankcase Cover Removal

12 bolts
Remove 12 bolts from the right crankcase cover.
Remove the right crankcase cover.
Remove dowel pin and gasket.

A.C.G. Set Removal

2 screws
Remove 2 screws from pulse generator and
then remove it.
Remove 3 bolts from right crankcase cover and
A.C.G. set.
3 bolts

Flywheel Removal

Remove the flywheel nut.
Install the shaft protector to the crankshaft.
Shaft protector
Pull out flywheel with A.C.G. flywheel puller.
Tool:
A.C.G. Flywheel puller
10-3