Precautions In Operation; Brake System - Sym MAXSYM 400i Service Manual

14. Brake System

Precautions in Operation

Caution
Inhaling asbestos may cause disorders of respiration system or lung cancer; therefore, never use
compressed air or dry brush to clean brake parts. Use vacuum cleaner or other authorized tool instead.
The brake caliper can be removed without removing the hydraulic system.
Air should be bled from the hydraulic system when remove it or the brake system is slack.
While refilling brake fluid, avoid mixing any other substances.
Do not spill brake fluid on the painted surfaces, because plastic or rubber parts might be damaged.
Check the operation of the brake system before riding.
Specifications
The thickness of the front brake disk
The thickness of the rear brake disk
Front and rear brake disk eccentricity
Front brake master cylinder inner diameter
Front brake master cylinder piston outer diameter
Rear brake master cylinder inner diameter
Rear brake master cylinder piston outer diameter
Diameter of front disk
Diameter of rear disk
Thickness of the front brake lining
Thickness of the rear brake lining
Torque values:
Brake hose bolts
Bolt for front brake caliper
Brake lever nut
Air-bleed valve
14-2
To this chapter contents
Item
3.0~4.0kgf-m
2.9~3.5kgf-m
0.8~1.0kgf-m
0.8~1.0kgf-m
Standard
4.000
5.000
< 0.100
11.000~11.043
10.957~10.984
14.000~14.043
13.957~13.984
240.000
220.000
5.000
.1
6.000
unit: mm
Limit
2.500
3.500
0.300
11.055
10.945
14.055
13.945
─
2.000
2.000